CRUSHERS CONE

GURSAN K series cone crushers are the solution we offer for processing abrasive and hard materials to increase production capacity without increasing operation and maintenance costs.

GENERAL INFORMATION TECHNICAL DATA

In hard and abrasive material processing applications, the roller bearing system of the GURSAN cone crusher makes it superior not only to impact crushers but also to other cone crushers with bronze, hydrostatic type bearing.

Since the GURSAN cone crusher does not have upper bearings, its inlet is completely open and this enables problem-free operation and homogenous feeding into the crushing chamber in coarse feeding applications.

The same pistons enable cleaning of the material collected in the machine by lifting the upper body in case of electric failure during operation.

GURSAN cone crusher is equipped with a dynamic setting system, which enables settings to be done during operation and from remote locations. This system operated by a single button enables fine setting in order to stabilize abrasion effects. Thanks to its rapid releasing option, the same mechanism enables rapid removal of bowl housing without requiring removal of the upper body.

There are 3 different cavity options according to the secondary, tertiary, or quaternary application conditions; Coarse, Medium, or Fine.

The machine is also equipped with a Hydraulic Anti-Spin System that requires no resetting or maintenance which prevents the head from spinning when running with intermittent feed. With the help of this mechanism, the wearing of mantle and bowl liner will be less and production will be much more cubical and homogeneous.

GURSAN cone crushers work on rubber pads. With the help of these rubber pads, vibration is absorbed and does not be transmitted to the chassis during operation.

All the cone crushers are equipped with a hydraulic motor table. With the help of this application which minimizes operator initiative; v-belt tensioning can be done by a single button and thanks to the special design piston below, this tensioning can be absorbed with the help of various factors.

Gürsan cone crushers do not require epoxy resin for changing spare parts. With the help of a new design spare part change system, the duration for this period decreased by 1/5 ratio.