All Reversible Impact Crushers are equipped with vibrating feeders to ensure regular feeding.

These machines are generally preferred at the tertiary stage of the crushing process. This type of crusher can produce high volumes of fine and chipping material due to its high circumferential rotor speeds.

The inspection doors are placed on both sides of the crusher body to check the inside of the crusher.

All the upper body can be opened to the sides via a hydraulic system during maintenance, and thus, all the wearing parts can be accessed easily.

The same hydraulic system is used in the adjustment of the distance between the aprons and the rotor.

Our rotors are manufactured from welded construction and internal stresses in the material formed after the welding process has been relieved by heat treatment. The hammers can be used in both directions (forward-reverse). Thanks to a specially designed hammer tightening system allows the use safely achieved high chromium alloy hammer, obtaining a high resistance to wear. In order to ensure full contact between the surfaces where the hammers lean on the rotor, these surfaces are ground. This, in turn, minimizes the shattering risk of the hammer and ensures that it can be manufactured from materials with much more hardness.

The Armour Plates at opposite surfaces where the rotor throws the material are assembled to the body and apron surfaces with wedged inserts which enables the use of almost all of the armor plates and also the completion of the disassembly-assembly process in a very short time.